Advertisement
（Fig. 1- Prepare two package cardboard boxes,
and flatten them as below.）
（Fig. 3- Package cardboard boxes）
Put the 2nd flattened cardboard box and the1st
cut-out cardboard together as one as shown
below.
Fix them by taping at 4 sides.
（Fig. 5- Light viewers are embedded.)
To prevent viewers falling
off, secure the viewers with
tape around the sdges.
（Fig. 2 - Regarding the 1st flattened cardboard box, cut out
the <154 x 245 mm-sized> shape at 5 locations.）
（Fig. 4- Regarding the 2nd flattened cardboard box, cut
out in the same way as Fig.2. All cardboards
are as below.
Cut on the same shape outlined in red as in the 1st cardboard.
(Fig. 6- Chart attached after matt-black painting or covering)
- Ａ 67 ･ AF-S VR 70-300/4.5-5.6G -
INC
JAA79551-R.3690.A
Advertisement
