Advertisement
INC
JAA79551-R.3690.A
Zoom brush
① Attach the zoom encoder brush (#104) temporarily with the screw (#105).
② In the direction of the arrow "A", rotate the cam ring all the way to WIDE-end.
③ Loosen the screw (#105), and adjust the brush position so that the points of the brush are placed as shown
in "Fig. 1".
④ Tighten the screw (#105), and fix it with "Screw lock".
Fig.1
Cam ring
#105
#104
Adhesive: Screw lock
Adjustment position of Zoom brush
Ａ
- Ａ 5・AF-S VR 70-300/4.5-5.6G -
Advertisement
