Advertisement
「VIBRATION」switch
⑥ With the equipment starts to vibrate, measure the length of the vibration width a of the laser beam.
α
「SERVO」switch
Notes：The phenomenon that the laser spot light shakes
up and down, right and left occurs during measuring the
vibration width.
This is the motion of the VR unit control and is not
defective.
⑦ Move the cursor to the Next button in the message
box on the screen and click it.
Vibration reduction function starts to perform and
the vibration width of the laser beam becomes be
narrow.
- Ａ 50・AF-S VR 70-300/4.5-5.6G -
⑤ Press the SERVO [ON] button and the
VIBRATION [START] button of the VR
lensadjustment equipment (J15380).
INC
JAA79551-R.3690.A
Advertisement
