Advertisement
Cam ring
① Fit the protrusion of the front fixed-tube into the cutout of the cam ring, then mount the cam ring on the front
fixed-tube. (Fig.1)
② Rotate the cam ring in the direction of the arrow shown in "Fig.2", and align the cutout of the cam ring with
that of the front fixed-tube. (Fig.2)
③ Attach the zoom control lever (#64) to the cam ring, and fix it with
two screws (#125). (Fig.3)
Cutout
Protrusion
Cam ring
Grease: GN-20S
Apply to 9 grooves.
Adhesive: Lock end B
Front fixed-tube
Fig.1
- Ａ 4・AF-S VR 70-300/4.5-5.6G -
#64
#125×2
#64
Caution:
In case a proper combination between the cam
ring and front fixed tube is not made, optical
performance may be less.
Therefore, even if only either of them is replaced,
be sure to use the combined unit which is provided
by RP.
INC
JAA79551-R.3690.A
Fig.2
Cutout
Fig.3
#125×2
Advertisement
