Advertisement
④ Put the roller (#75: A ～ D) and the roller (#76: A ～ D) at three places through the cam groove of the front
fixed-tube, then fix these with the nut (#74) at three places.
⑤ Remove the body from the lens stand (
Mounting of 1st lens-group tube
① Mount the 1st lens-G tube on the lead groove ring by aligning the index (of the 1st lens-G tube) with the
cutout (of the lead groove ring).
Then tighten three screws (#121).
Grease: MZ-800S
Apply to the overall contacting surface
with the cam ring.
J11338).
★
Caution:
Align the direction of the nut and reference lines
as below. Then, push the nut (#74) all the way
seated at three places .
#75:A A ～ D×3
#76:A A ～ D×3
#74×3
- Ａ ・AF-S VR 70-300/4.5-5.6G -
JAA79551-R.3690.A
★ : New tool
#74
#121×3
Adhesive: Lock end B
1st lens-group tube
Index
#145A×2
Caution:
The two washers (#145A) are attached
at the positions of the picture.
Cutout of the lead groove ring
INC
Advertisement
