Advertisement
Rear fixed-tube
・Mount the rear fixed tube on the front fixed tube, by conforming to the shape of the front fixed tube. Then
tighten the one screw (#116) and two screws (#106).
Rear fixed-tube
Front fixed-tube
Change-SW unit
・ Connect the FPC of the change-SW unit to the connector of the main base plate unit.
#106×2
(2)
Adhesive: Lock end Ｂ
(1)
(3)
#116
Adhesive:
Lock end Ｂ
- Ａ ・AF-S VR 70-300/4.5-5.6G -
JAA79551-R.3690.A
Caution:
Tighten the one screw (#116) and two
screws (#106) in the order from (1) to (3).
Pass other FPCs than SWM-FPC
through the grooved part of the inside
tube hole of the rear fixed tube.
Main base plate unit
Change-SW unit
INC
Advertisement
