Advertisement
VR LENS POSITION ADJUSTMENT
① Move the cursor to a box in front of the [VR Lens Position Adjustment] and click it to mark the check marking.
② Move the cursor to the Execute button and click it.
・VCM Polarity Adjustment (Controlled automatically)
Detect the polarity of the VCM (Voice Coil Motor) and write it in EEPROM as the compensation value.
In-between times, the message to confirm the lens position of angle (0 or 90degrees) appears.
So, set the lens to the position and click the [OK] button.
When [OK] is shown on the window, move the cursor to the Next button and click it.
③ The message like a picture on the left is shown.
Set the VR mode switch of the lens to ON (Full
or Release), and then move the cursor to the OK
button and click it.
- Ａ 47・AF-S VR 70-300/4.5-5.6G -
INC
JAA79551-R.3690.A
Advertisement
