Advertisement
⑤ Fit the lens to be examined in the camera. Set the zoom to MIDDLE (200 mm).
⑥ Looking through the viewfinder, focus manually and adjust the height and tilt to make the chart fill the entire
finder field frame.
⑦ Adjust the tilt of the slide rail to make the three chart lines position in the center of the viewfinder, when the
tripod is slid all the way to the front and back.
⑧ Connect the PC and camera via USB cable. (Camera setting: Mass Storage）
⑨ Start the adjustment software (AFS70_300.exe).
⑩ "Lens Select" window opens. Select "AF-S VR70-300/4.5-5.6G", then click "OK" button.
⑪ Click the "Reset all log" button.
� � Set the indication pointer of the tripod to 30 cm, and set the focus mode switch to "M/A" then rotate the
focus ring to "∞"-end.
⑬ Click "Focusing" button. AF is activated to focus and the shutter is released.
- Ａ 60 ･ AF-S VR 70-300/4.5-5.6G -
INC
JAA79551-R.3690.A
Advertisement
