Advertisement
・ Procedure for alignment (2nd lens group)
① Prepare a camera (D100). Set the shutter speed to "M1/60", the aperture to full and the focus mode to "S".
Set the VR ON/OFF switch to OFF.
On the shooting menu, set "Image Quality" mode to "RAW", "WB" to "Preset" and "ISO" to "200".
② Set up the camera (D100) on a tripod on the slide rail. Set the indication pointer of the tripod to 30 cm.
③ Set the alignment chart (J19128) as shown below.
Magnifications: 30
Focal plane mark of camera
Back
④ Turn the power of viewers (5 pcs.) to ON.
(Note: If the batteries of viewers are exhausted causing decreased brightness, the shooting data cannot
be obtained correctly.)
Rail tool
Front
- Ａ 59 ･ AF-S VR 70-300/4.5-5.6G -
30 cm
Alignment chart
（J19128）
6 m 50±3 cm
Front
Viewer× 5 pcs.
Back
INC
JAA79551-R.3690.A
Advertisement
