Advertisement
VR GYRO ADJUSTMENT
① Move the cursor to a box in front of [VR Gyro Adjustment] and click it to mark the check marking.
② Move the cursor to the Execute button and click it.
Top view
Laser switch
Nut
Laser beam pointer
- Ａ 49・AF-S VR 70-300/4.5-5.6G -
③ The message like a picture on the left is shown.
Set it to the Telephoto settings.
④ Loosen the nut of the laser switch of the VR
lens adjustment equipment (J15380) and rotate
the screw in an arrow direction to give the laser.
INC
JAA79551-R.3690.A
Advertisement
