INC
JAA79551-R.3690.A
⑳ After the seven measurements, point the cursor to the confirmation screen of the software. Click it three
times, and if "Information display" shows "END", the lens optical alignment is completed.
If "Information display" shows "Need Adjustment.", rotate the adjusting screw by approx 45°-turn
increments, based on "Reference" on the next page.
If "Check the 3rd LENS GROUP UNIT or other parts." is shown, check defects of the 3rd lens-G unit or
other light-related parts, and replace it/them.
Confirmation screen
Information display
- A 64 ・ AF-S VR 70-300/4.5-5.6G -