Cable Arm Hook Installation - GE LOGIQ P5 Service Manual

GE H
EALTHCARE
D 5394141, R
IRECTION EVISION
8-7-5

Cable Arm Hook installation

1.) Cable Arm Hook should be installed in prior to installing Probe Cable Hanger, or Endo Probe
Holder.
2.) Unscrew 1 existing screw(2159634, BH M4x10 WHT) from the rear side of the keyboard.
3.) Screw 2 screws(2306565 BH M4x16 WHT, 2159634 BH M4x10 WHT) to fix the Cable Arm hook.
User longer screw provide on the upper hole, and use existing screw removed in the step 2 on the
figure below.
8-184
5
Figure 8-256 Cable Arm Hook installation
Figure 8-257 Cable Arm Hook installation
Section 8-7 - Mechanical Option Installation instruction
LOGIQ™ P5 S M
EVICE ANUAL