8-2-13-5 Cart Cable Guides Installation Procedure - GE Venue Fit Technical Publication

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2

8-2-13-5 Cart cable guides Installation Procedure

1) Install the cart cable guides.
2) route the cables through the cart tilt cable holder.
3.) Mont the system on the cart and secure it by tightening the 2 captive screws.
4.) Reconnect all cable to the system.
Perform the checks listed in Table 8-36 - Peripherals section
Chapter 8 - Replacement Procedures
VENUE FIT™ SERVICE MANUAL
8-31