Rear Drive Cage; Removing The Rear Drive Cage - Dell 0G8DW Installation And Service Manual

Figure 94. Installing the SAS expander card
Next steps
1 Connect the SAS cables to the SAS expander card.
2 Install the backplane cover.
3 Install the cooling fan assembly.
4 Install the cooling shroud.
5 Follow the procedure listed in

Rear drive cage

Removing the rear drive cage

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove all the drives.
4 Disconnect all the cables from the rear drive backplane.
Steps
1 Using Phillips #2 screwdriver, loosen the screws that secure the drive cage to the system.
2 Pull and hold the screws to lift the drive cage away from the system.
After working inside your system.
Safety instructions.
Before working inside your system.
Installing and removing system components 143