System Connector Cover - Sony Ericsson W600i Working Instruction, Mechanical

3. Align the system connector contact pad portion of
the circuit board with the slot in the side of the
system connector that is adjacent to it.
4. Then slide the system connector onto the circuit
board until it is completely seated.
•
Perform sections 2.2.1 - 2.2.4 the Base Reassembly procedure.

4.16 System Connector Cover

Replacement Procedure
•
Perform sections 2.1.1 - 2.1.2 of the Base Disassembly Procedure
Tools needed:
•
Torque screwdriver
1. Unplug the system connector cover from the system
connector.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
•
Torx Plus size 5 bit
Step-by-Step Instructions
Working Instruction, Mechanical
67(128)