NOTE!
4. Using the flat end of a pry tool, apply gentle pressure
to the liquid intrusion indicator to ensure a good
adhesive bond the inner base cover.
•
Perform section 3.2.4 the Flip Reassembly procedure.
•
Perform sections 2.2.2 - 2.2.4 the Base Reassembly procedure.
Liquid Intrusion Indicator on Display Flex Film Assembly
Tools needed:
•
1. Locate the square pad on the display flex film
assembly that is directly below the navigation
keypad's dome foil.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Do not use your finger to apply pressure to
the liquid intrusion indicator. Using a finger
to apply pressure may cause partial
activation of the indicator.
•
Pry tool
Style 2A ESD tweezers (Blunt Tip)
Step-by-Step Instructions
Step-by-Step Instructions
Working Instruction, Mechanical
77(128)