Liquid Intrusion Indicator; Liquid Intrusion Indicator Removal; Liquid Intrusion Indicator Installation - Sony Ericsson W600i Working Instruction, Mechanical

Hide thumbs Also See for W600i:
Table of Contents

Advertisement

4.21 Liquid Intrusion Indicator

4.21.1

Liquid Intrusion Indicator Removal

If a liquid intrusion indicator is activated, handle the unit according to the instructions of your
Sony Ericsson representative.
4.21.2

Liquid Intrusion Indicator Installation

There are two liquid intrusion indicators on this product. One is located on the inner base cover.
The other is located on the display flex film assembly. Use the set of instructions that applies to
the location the indicator is being installed.
Liquid Intrusion Indicator on Inner Base Cover
Tools needed:
1. Locate the portion of the inner base cover that
extends between the two screw bosses near the hinge
opening.
2. Orient the flip assembly so that the external side of
the extension that is between the two screw bosses is
towards you.
3. Using tweezers, place a new liquid intrusion
indicator in the center of the channel that is midway
the external side of the extension.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Pry tool
Style 2A ESD tweezers (Blunt Tip)
Step-by-Step Instructions
Working Instruction, Mechanical
76(128)

Advertisement

Table of Contents
loading

This manual is also suitable for:

W600cW550iW550c

Table of Contents