4.27.2
Flip Screw Cover Panel Installation
Tools needed:
1. Obtain a new flip screw cover panel and remove the
protective backing from its adhesive film.
2. Orient the new screw cover panel so that the side of
the screw panel with adhesive is towards the inner flip
cover.
3. Insert the screw cover panel in its cavity on the inner
flip cover and apply pressure to it for 3 seconds so
that a good bond forms between the parts.
•
No other reassembly required
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
•
None
Step-by-Step Instructions
Working Instruction, Mechanical
90(128)