Style-Up Flip Cover Installation - Sony Ericsson W600i Working Instruction, Mechanical

Hide thumbs Also See for W600i:
Table of Contents

Advertisement

3.2.3

Style-Up Flip Cover Installation

If this part is being replaced, a new part should be used in the place of the old part when
performing the following procedure.
Tools needed:
1. Locate the two tabs on the edge of the style-up cover
where the power button cut out is located.
2. Insert the two tabs in the corresponding notches in
the end of the flip assembly and rotate the style-up
cover onto the flip portion of the phone.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
None
Step-by-Step Instructions
Working Instruction, Mechanical
40(128)

Advertisement

Table of Contents
loading

This manual is also suitable for:

W600cW550iW550c

Table of Contents