Sony Ericsson W600i Working Instruction, Mechanical page 12

4. Once the catches holding the circuit board have been
released, lift the end of the circuit board that is
adjacent to the antenna just far enough away from
the outer base cover that the side speaker's connector
is clear of the outer base cover's side wall.
5. While holding the circuit board in this lifted position,
unplug the side speaker from the circuit board.
6. Once the side speaker is disconnected, continue to
rotate the circuit board away from the end of the
outer base cover containing the antenna. Once the
angle between the circuit board and the outer base
cover has exceeded 45 degrees, the circuit board can
be easily lifted from the outer base cover.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
12(128)