Power Key Installation - Sony Ericsson W600i Working Instruction, Mechanical

4.45.2

Power Key Installation

Tools needed:
NOTE!
1. Locate the power key opening on the top edge of the
inner flip cover.
2. Orient the power key so that the shape of the key
corresponds to the shape of its opening in the inner
flip cover.
3. Insert the key into its opening so that the external
surface of the key is towards the outer edge of the
inner flip cover.
NOTE!
•
Perform sections 3.2.1 - 3.2.4 of the Flip Reassembly Procedure
•
Perform sections 2.2.2 – 2.2.4 of the Base Reassembly Procedure
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
None
Step-by-Step Instructions
Due to the ease in which these keys fall out, the
camera key and the power key should be
installed just before the display carrier
assembly and the inner flip cover are
reassembled.
Make sure power key does not fall out before
the display carrier assembly and the inner flip
cover can be reassembled.
Working Instruction, Mechanical
126(128)