Circuit Board Removal - Sony Ericsson W600i Working Instruction, Mechanical
Hide thumbs
Also See for W600i:
- User manual (93 pages) ,
- Quick manual (2 pages) ,
- Introduction manual (13 pages)
Table of Contents
Advertisement
2.1.4
Circuit Board Removal
Tools needed:
•
1. Unplug the system connector cover from the system
connector and set the system connector cover aside.
2. Unplug the keypad switch assembly's flex film from
its connection on the circuit board using a pry tool
and set the keypad switch assembly aside.
3. Using a pry tool, gently pry in the two locations
indicated to release the catches that hold the circuit
board in the outer base cover.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Pry Tool
Step-by-Step Instructions
Working Instruction, Mechanical
11(128)
Advertisement
Table of Contents
