Battery Installation - Sony Ericsson W600i Working Instruction, Mechanical

2.2.3

Battery Installation

If this part is being replaced, a new part should be used in the place of the old part when the
following steps are being performed.
Tools needed:
1. With the label side of the battery oriented away from
the phone, insert the end of the battery with
connection pads into the end of the battery cavity
nearest the camera.
2. While pushing the battery towards the camera,
simultaneously press the other end of the battery
down into the battery cavity.
All of the sections of the Base Reassembly following this section must be performed in sequential
order to reassemble the base portion of the phone.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
None
Step-by-Step Instructions
Working Instruction, Mechanical
22(128)