4.46 Rubber Plug
Replacement Procedure
•
Perform sections 3.1.2 - 3.1.3 of the Flip Disassembly Procedure.
Tools needed:
•
1. Orient the phone so that the display is towards you.
2. Locate the two round rubber plugs at the bottom of
the display carrier.
3. Using style 2A tweezers, remove the rubber plug(s)
that needs replacement.
4. Obtain a new rubber plug and orient it so that the end
of the plug with the hole in it is pointed away from
the display carrier.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Style 2A ESD tweezers (Blunt tip)
Step-by-Step Instructions
Working Instruction, Mechanical
127(128)