2.3
System Connector Interface
2.3.1
Mechanical Overview
External interfaces to the module are made primarily through a 40 pin, standard 0.050-
inch pitch, ODU header show below.
System Connector
Mating Ribbon Connector
SMT Mating Header
Ribbon cable, AWG 30
Please consult the ODU site for more information on mating options:
Confidential
USERS MANUAL
Document number
4/198 17-LXE 108 566 Uen
Figure 5: 40-Pin System Connector
Figure 6: 40-Pin System Connector Pin Numbering
Description
515.569.035.140.xxx
525.060.035.040.xxx
525.041.035.040.xxx
921.659.031.040.000
Table 1: System Connector and Mating Part Numbers
ODU Part Number
Revision
PA7
Dimension A
Dimension B
24.13 mm
22.86 mm
http://www.odu.de
11(42)