NOTE!
4. Using tweezers, position the dust cloth in its recessed
area so that the entire external opening is covered.
5. Once the dust cloth is correctly positioned, carefully
smooth it into place using the flat end of a nylon
pointer.
•
Perform sections 3.2.1 - 3.2.4 of the Flip Reassembly Procedure
•
Perform sections 2.2.2 – 2.2.4 of the Base Reassembly Procedure
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Use tweezers to handle the new dust cloth
once it has been separated from its protective
backing so that contamination of its adhesive
is avoided.
Working Instruction, Mechanical
115(128)