Co-Brand Label Installation - Sony Ericsson W600i Working Instruction, Mechanical

4. Along one of the edges of the co-brand label that is
adjacent to the base's screw cover cavity, slide the tip
of one side of a pair of style 2A tweezers between the
co-brand label and the ledge portion of the inner base
cover to which the co-brand label is adhered.
5. Grip the co-brand label with the tweezers and peel it
from the inner base cover.
6. Using alcohol and lint free wipes, clean the co-brand
label area.
4.28.2

Co-Brand Label Installation

Tools needed:
1. Obtain a new base screw cover panel and remove the
protective backing from its adhesive film.
2. Orient the new screw cover panel so that the side of
the screw panel with adhesive is towards the inner
base cover.
3. Insert the screw cover panel in its cavity on the inner
base cover and apply pressure to it for 3 seconds so
that a good bond forms between the parts.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
•
Style 2A ESD tweezers (Blunt tip)
Step-by-Step Instructions
Working Instruction, Mechanical
92(128)