Sony Ericsson W600i Working Instruction, Mechanical page 56

3. Obtain a new rear speaker cloth and place it in the
recess around the rear speaker as shown.
4. Orient the rear speaker module relative to the interior
surface of the outer base cover so that the speaker
cloth on the speaker module is towards the outer
base cover's rear speaker grill.
5. Insert the rear speaker module into the outer base
cover so that it is seated down against the interior
surface of the outer base cover.
NOTE!
•
Perform sections 2.2.1 - 2.2.4 the Base Reassembly procedure.
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
When the rear speaker module is correctly
seated, the RF port plug opening in the outer
base cover is centered in the circular
opening in the speaker module.
Working Instruction, Mechanical
56(128)