Infrared Test; Bluetooth Test; System Connector Test - Sony Ericsson K750i Test Instruction, Mechanical

3.3.2

Infrared Test

To verify that the Infrared communication is working:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the function by entering Connectivity/Infrared port and select "10 minutes".
3. Set up an infrared link between an IR device and the phone. The IR-module is placed on
the right side of the phone. If a link can be established, the module is considered working.
3.3.3

Bluetooth Test

To verify that the Bluetooth communication is working:
1. Insert a SIM card, connect a battery and start the unit.
2. Activate the Bluetooth function by entering Connectivity/Bluetooth and turn it on.
3. Set up a link between the phone and another Bluetooth compatible device. If a connection
can be established the Bluetooth module is considered working.
3.3.4

System Connector Test

Hands free equipment and a charger are used in this test, to check the functionality of the
System Connector.
1. Insert a SIM card, connect a battery and start the unit.
2. Connect the Hands free equipment to the system connector and set up a call and listen if
you can speak/hear in the hands free set.
3. Connect the charger to the system connector and see if the phone starts to charge and if
the charging is indicated in the display.
2/000 21-1/FEA 209 544/94 A
©
Company Internal Sony Ericsson Mobile Communications AB
Test Instruction, Mechanical
6(7)