Board Frame Removal From Circuit Board - Sony Ericsson K800 Working Instruction, Mechanical

2.9
1. Locate the flash assembly's flex film connection
to the circuit board.
2. Rotate the black portion of the connector toward
the flex film as shown.
3. Pull the flex film from the connector.
4. Remove the shield can lid by using a pry tool at
each corner.
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB

Board Frame Removal from Circuit Board

Step-by-Step Instructions
Working Instruction, Mechanical
14(74)