Monitor Storage, Configurations; Monitor Vtl Page - ATTO Technology FastStream VT 5300 Installation And Operation Manual

3.0 Monitor storage, configurations

You may monitor storage and determine the performance of drives attached to the FastStream VT using
various displays and tests in the ExpressNAV interface.
If you have set up at least one Virtual Tape
Library (refer to Configure Virtual Tape
7.), you may monitor various aspects of your
storage and the VT and to view various metrics to
measure performance for physical drives attached
to the FastStream during normal system operation
and drive initialization and verification.

Monitor VTL page

The Monitor VTL page is the first page you see
when you open the ExpressNAV interface after
setting up at least one VTL.If you have not
created a VTL, the body of the page is blank.
Each VTL has its own tab. Information displayed
includes RAID Level, RAID status, capacity, the
Fibre Port and LUN to which the VTL is mapped,
Exhibit 3.0-1 The ATTO FastStream VT Monitor VTL page.
15
ATTO Technology Inc. FastStream VT 5300 Installation and Operation Manual
CAUTION CAUTION
on page
New performance data is updated every 60
seconds which impacts performance
slightly, even if you minimize the browser
window. Exit the ExpressNAV interface
completely whenever you need maximum
performance.
the element, element type, its bar code and
whether or not the element is write protected.
To get further information or to manage the VTL,
click on the menu items on the left-hand side of
the screen. To return to this screen at any time,
click on VTL