The Ethernet port provides monitoring and management using the ExpressNAV interface.
Remote system monitoring may be set up through
Remote Management page of the ExpressNAV
interface (see Exhibit 3.0-3) using the Simple Network
Management Protocol (SNMP) or Email.
Various types of problems may create a notification:
• Device errors such as medium error, aborted
command and hard error
• Device transitions from online to offline
• Critical and warning temperature conditions
• Critical and warning voltage conditions
Messages may state that a device is not working, a
medium has an error, or a command has been
stopped.
Exhibit 3.0-3 The Remote Management page in the ExpressNAV interface.
19
ATTO Technology Inc. FibreBridge Installation and Operation Manual
3.2 Monitor, Manage Remotely
You may designate which warning level a recipient
receives. For example, a recipient with a critical
severity level only receives critical messages and not
warning or informational messages.
In both monitoring systems, you select the warning
levels for each recipient:
• All : all warnings, critical events and
informational messages
• Warning: events which are either warnings or
critical events
• Critical: only events which are critical
• None : no messages are sent