Flowtron Universal Service Manual
2.19
Click on the Installation.cfg file, and click Open. The relevant files will be copied to complete
the Communicator software installation process.
Note: While the files are copied, a Communicator Command & Configuration Files dialog
box is displayed (refer to Figure 75).
Figure 75 - Communicator Software Installation - Command and Configuration Files
2.20
When the files have been copied, the Communicator software will then start to run (refer to
Chapter 3 "Using the Communicator Software").
2.21
The installation is now complete, and you can now safely remove the Communicator software
CD ROM from the PC.
Issue 2
Sep 2009
SER0009
Updating the software
Chap 6
Page 7