Maintenance
2
Cleaning Instructions
If the pump is to be cleaned by spraying cleaning solutions directly onto it, the following (Refer to
Figure 10) instructions must be observed:
2.1
Lay the pump down on its rear case, so that the cleaning solution will not collect on the top cover
assembly adjacent to the two hose set assemblies.
2.2
Use a soft cloth to remove any unwanted cleaning solution from the top cover assembly.
Note: Do not let any cleaning solution collect here
Figure 10 - Top Cover Assembly and Hose Set Assemblies
Chap 3
Page 2
Hose Set Assemblies
SER0009
Flowtron Universal Service Manual
Front Case
Rear Case
Top Case
Assembly
Issue 2
Sep 2009