Replacing The Rear Case - Arjohuntleigh FLOWTRON UNIVERSAL Service Manual

Flowtron Universal Service Manual
40

Replacing the Rear Case

40.1 Remove the mains/power cordset from the pump (Refer to Page 7, Section 6).
40.2 Remove the handle and hook assembly, and the rear case, from the pump (Refer to
Page 13, Section 12).
40.3 Lay the new rear case (Fig 62, Item 10) down with the inside surface pointing upwards.
40.4 Stick the two compressor support rubbers (Fig 62, Item 20) onto the front case.
40.5 Install the handle and hook assembly, and the rear case, onto the pump (Refer to
Page 13, Section 13).
40.6 Install the mains/power cordset onto the pump (Refer to Page 7, Section 7).
40.7 Stick the serial number and product labels onto the rear case (Refer to Page 3, Section 2).
20
Item Part Number
10 507302
20 BP027
Issue 2
Sep 2009
Figure 62 - Replacing the Rear Case
Table 27 - Rear Case Parts List
Rear Case
Compressor Support Rubber
SER0009
Description
Pump Repair
10
Qty
1
2
Chap 5
Page 47