Arjohuntleigh FLOWTRON UNIVERSAL Service Manual page 93

Flowtron Universal Service Manual
2.13 At the end of the installation, the Installation Complete dialog box will then be displayed to
indicate that the Communicator software has been successfully installed (refer to Figure 70).
Figure 70 - Communicator Software Installation - Complete
Click OK and the Setup Message is then displayed (refer to Figure 71).
Figure 71 - Communicator Software Installation - Setup Message
2.14 In order to complete the installation, you need to copy files from the Communicator software CD
ROM and then start the Communicator program running.
Note: It is preferable to do this now, while the CD ROM is still loaded in the PC.
2.15 Click Yes to start copying the additional files, and then the Communicator program will be
started automatically. The File Location dialog box is then displayed (refer to Figure 72).
Figure 72 - Communicator Software Installation - File Location
Issue 2
Sep 2009 SER0009
Updating the software
Chap 6
Page 5