Maintenance Checks - Arjohuntleigh FLOWTRON UNIVERSAL Service Manual

Flowtron Universal Service Manual
3

Maintenance Checks

If any parts are found to be damaged they must be replaced in accordance with Chapter 5,
Pump Repair.
3.1 Visually inspect the following for damage, wear and potential faults:
• Outer casing:
• Run button
• Handle and hook assembly:
• Output hose set assemblies:
• LCD display + membrane label:
• Mains/power cord:
• Rubber feet (8 Off):
• Labels:
3.2 Remove the rear case (Refer to Chapter 5, Page 13, Section 10) and visually inspect the
following for damage, wear, security and potential faults:
• Rechargeable battery on the control PCB.
• Compressor assembly.
• Compressor anti-vibration pads.
• Motor and manifold assembly.
• Control PCB and LCD display assembly.
• Power supply PCB assembly, including fuses.
• Wiring.
• Internal Tubing.
• Screws, nuts and bolts.
Issue 2
Sep 2009
Check for damage and security.
: Check function.
Check for damage and security.
Check for damage and security of pump connection.
Check for damage and security to case.
Check for damage and security of plug
Check for security.
Check all labels are present and legible
SER0009
Maintenance
Chap 3
Page 3