Setting The Machine Id - Loma IQ3X Operating Instructions Manual

41

4.4 Setting the Machine ID

The Machine ID is printed out on any Reports or Logs and can be edited to a convenient name
to allow them to be easily associated to a machine. Up to six characters, either letters or
numbers, may be entered.
To set the Machine ID, proceed as follows:
1. Select Menus > Machine details to display the Machine details menu options.
2. Use the Navigation Keys
Key to enable the first character of the required Machine ID to be entered.
3. Use the Navigation Keys
number) to be used for the Machine ID and then press the OK / Enter Key
selection. This will then automatically select the second character for editing.
4. Repeat step 3 until you have selected and confirmed each character required for the
Machine ID. Up to six characters may be used.
5. Once you have entered the required Machine ID, press the Cancel Key
Machine menu.
Original Document
to select the Machine option and press the OK / Enter
to select the required first character (letter or
Operating Instructions
to confirm the
to exit the
Copyright © Loma Systems