Table of Contents
Advertisement
Operating Instructions
To change the time and date, proceed as follows:
1.
Select Menus > Setup > Calendar to display the Calendar menu options.
Use the Navigation Keys
2.
Enter Key
Use the Navigation Keys
3.
OK / Enter Key
Repeat steps 2 and 3 above to select the required values for the Month, Day, Date, Hours
4.
and Minutes options.
Setting the Language
To set the system language, proceed as follows:
1.
Select Menus > Service > Configuration > General to display the General menu options.
Use the Navigation Keys
2.
/ Enter Key
Use the Navigation Keys
3.
the OK / Enter Key
Setting the Machine ID
The Machine ID is printed out on any Reports or Logs and can be edited to a convenient name to
allow them to be easily associated to a machine. Up to six characters, either letters or numbers, may
be entered.
To set the Machine ID, proceed as follows:
1.
Select Menus > Machine details to display the Machine details menu options.
Use the Navigation Keys
2.
Enter Key
Use the Navigation Keys
3.
number) to be used for the Machine ID and then press the OK / Enter Key
confirm the selection. This will then automatically select the second character for editing.
Repeat step 3 until you have selected and confirmed each character required for the
4.
Machine ID. Up to six characters may be used.
Once you have entered the required Machine ID, press the Cancel Key
5.
Machine menu.
74
to enable the current value to be edited.
to confirm the selection.
to enable the current value to be edited.
to confirm the selection.
to enable the first character of the required Machine ID to be entered.
to select the Year option and press the OK /
to select the required Year and then press the
to select the Language option and press the OK
to select the required Language and then press
to select the Machine option and press the OK /
to select the required first character (letter or
to
to exit the
Advertisement
Table of Contents
