Safety Awareness - Loma IQ3X Operating Instructions Manual

Operating Instructions
Intended Use of the Machine
Loma Metal Detection Systems are designed to be used in an industrial environment for
detecting contaminants and over/underweight products presented in packaging. Any
improper use could invalidate the EC Declaration of Conformity issued with the system and also
the system warranty. This section provides further details.
Noise Levels
Generally in an industrial environment some background noise is present due to the operation of
electrical equipment and mechanical movements of machinery such as conveyors and
electrical noise. In general operation, Loma Metal Detection Systems do not emit a level of
noise that is hazardous.
End of Life Treatment
The Waste Electrical and Electronic Equipment recycling (WEEE) Regulations 2006 and the CE
Directive 2002/96/EC require that electrical and electronic equipment must be recycled at the
end of its useful life. This section provides some guidelines.
Emergency Procedures
This section lists the potential emergencies that may be encountered and the associated
procedures.
Quality Assurance
If your business is operating under an approved Quality Management System, all activities
covering the safe operation and maintenance of the Metal Detection System will need to be
incorporated into the system to ensure continued compliance. This section provides some
guidelines on what needs to be considered.
End User Licence Agreement
This section contains details of the End User Licence Agreement for the system software.

2.1 Safety Awareness

Loma metal detectors employ low-intensity electromagnetic fields in compliance
with current legislation.
If used in close proximity to an electromagnetic field, the operation of
pacemakers, cardiac defibrillators and other life support devices can be affected.
Wearers of these devices should consult their doctor for advice on avoiding this
hazard.
It is strongly advised that all installation, operation and maintenance personnel read this guide
before working on the IQ3X Metal Detection System and comply with the instructions and
information contained herein.
It is essential that all personnel engaged in activities associated with the installation, operation,
servicing and maintenance of the IQ3X Metal Detection System have been adequately trained
and are appropriately qualified and experienced to do so.
All personnel should comply with the statutory requirements and regulations, including the
provisions of the Health and Safety at Work Act (UK), other EU relevant legislation, relevant OSHA
regulations, and any amendments that may become legal requirements.
Copyright © Loma Systems
14
Original Document