Loma IQ3X Operating Instructions Manual page 87

87
8. Wait until file has uploaded successfully
9. Disconnect microUSB cable from UCB (yellow)
10. Switch OFF "P" switch on UCB DIP switch (red)
11. Press reset button S1 (blue)
One LED is still ON and one LED diode must blink slowly – appox one per second (green)
12. Switch OFF machine and wait at least 10 seconds (All LED diodes must completely light down)
13. Switch machine ON and wait for configuration menu
14. Switch OFF "C" switch on UCB DIP switch (red)
15. Begin with configuration
If LED is not blinking slowly, repeat upload procedure from beginning
Original Document
Operating Instructions
Copyright © Loma Systems