Safety Labels - Loma IQ3X Operating Instructions Manual

Operating Instructions

2.4 Safety Labels

Safety labels are attached or etched in appropriate places to highlight areas of the system
where caution should be taken to avoid potential hazards. The labels used are listed and
described below.
Label
Copyright © Loma Systems
CE Mark / Machine identification etched on the machine
includes:
Power supply data
l
Date of manufacture
l
Serial Number
l
Model
l
Mandatory Safety Label on all Loma Products
Must read Operator's Manual prior to use.
Caution: Electric Shocks
Includes voltage and phase details which will vary dependant on
the available supply.
Caution: Hazardous Machinery
All machinery has a potential for being hazardous if the
appropriate level of care is not taken and any safety warnings not
followed.
Caution: Pneumatic Reject Device
Reject devices operate very quickly to remove contaminated
products from a fast moving production line. Care should be
taken to avoid contact with a reject device when it is operating.
Caution: Pinch Point
Moving parts of machines, specifically conveyors, provide
opportunities for trapping fingers or even items of clothing in the
mechanism if care is not taken.
Caution: Isolate Machine Before Maintenance
Electrical power should be disconnected before carrying out
maintenance operations that expose staff to potentially lethal
voltages.
Caution: Isolate air supply before maintenance
Compressed air should be disconnected before carrying out
maintenance operations where reject devices could be
activated accidentally.
Message
Original Document
18