Machine Details - Loma Superscan Micro ISC Manual

MENUS A to Z
L o m a S u p e r s c a n M i c r o
CANCEL
CHANGE
Description:
This menu gives access to details about the software fitted to the machine and the machine ID.
Typically, when contacting LOMA for technical support we may wish to know the software version
that is fitted to your machine, and this can be obtained from within this menu.
The machine ID is set to the serial number of the machine when the unit is dispatched from our
factory. This will be printed out on any reports or used within the LomaView options as necessary. If
required, the serial number can be changed to any other alphanumeric code, such as the line number,
simply by editing the serial number in the same way as the product name can be edited.
34

MACHINE DETAILS

MACHINE DETAILS
SETUP CALIBRATE
I S C
ENTER
RESULTS
RUN DETECT
CALIBRATE
SYSTEM FAULT
RUN ERROR