Logged Out; Starting And Stopping; Starting The Machine - Loma IQ3X Operating Instructions Manual

Operating Instructions

3.13 Logged Out

To log out of machine, proceed as follows:
1. Select the Keylock button
the process above should be ENGINEER.
2. Use the Scroll buttons
3. Press the Tick button
4. You have now logged out and 'Locked' the machine.

3.14 Starting and Stopping

This section provides guidance for starting and stopping the IQ3X Metal Detector, including
stopping the machine in an emergency.
The following procedures should only be carried out once all installation and
commissioning activities have been completed and operators trained in the use of
the machine.

3.15 Starting the Machine

To start the machine, proceed as follows:
1. Ensure that the machine is connected to a suitable power supply and, if a pneumatic reject
device is fitted, a suitable air supply.
2. Turn the Isolator Switch, located on the Electrical Services Box, in a clockwise direction. This will
switch on the electrical supply to the machine.
3. The machine will then load its operating software and display the software version details in
the 2 line display.
4. Once the software has been loaded the current Threshold / Signal is displayed.
The top part of the display shows the signal, together with the threshold above which packs will
be rejected. The signal is updated continuously as the signal changes. Pressing the Key button, in
Supervisor level or above, allows adjustment of the threshold level.
The bottom part of the screen displays the number and name of the currently selected product.
It also shows the top level menu key
5. Push the green Start button to start the conveyor.
6. The machine is now ready to start inspecting the selected product.
Copyright © Loma Systems
to display the current user level, which following on from
to select the LOCKED user level.
to confirm the selection.
36
Original Document