Electrical Services Box - Loma IQ3X Operating Instructions Manual

Operating Instructions

3.8 Electrical Services Box

When the IQ3X Metal Detector head is supplied fitted to a Loma conveyor, the following
switches and buttons are also provided, mounted on the Electrical Services Box:
Copyright © Loma Systems
The Isolator Switch is located on the front of the
Electrical Services Box and is shown here in the ON
position. Power is being supplied to the machine.
The Isolator Switch is shown here in the OFF
position. Power is NOT being supplied to the
machine.
The conveyor Start/Stop button is located on the
front of the Electrical Services Box and is used to
start and stop the conveyor.
Pushing the green section at the top of the button
starts the conveyor and the white LED located in
the middle of the button is lit to indicate this.
Pushing the red section at the bottom of the
button stops the conveyor and the white LED is
extinguished.
The Emergency Stop button is located on the
front of the Electrical Services Box and is to be
used in EMERGENCIES ONLY to stop the machine.
32
Original Document