Table of Contents
Advertisement
83
5.7 Air Regulator Unit Maintenance
With the exception of systems fitted with Air Blast or Stop-On-Detect or electrically driven rejects
the compressed air supply pressure to the fitted reject device is fed through an air regulator unit.
The particular model of regulator may vary according to the specification of the system. Each
type will have a pressure adjustment control air input and output fittings a pressure gauge and
water trap.
Adjustment of the air pressure is normally carried out by pulling up the adjustment knob to
release the lock and by turning the control clock or anti-clockwise the pressure can be adjusted.
Removal of water from the water trap bottle is carried out by operation of a rotating knob or by
pressing a button. Either way the control will be located at the bottom of the water trap bottle.
Water should be removed regularly.
The correct setting of the air pressure can be found in the individual system specifications in the
Technical Specifications chapter.
Original Document
Operating Instructions
Copyright © Loma Systems
Hide quick links:
Advertisement
Table of Contents
