Setting Up The User Options - Loma IQ3X Operating Instructions Manual

Operating Instructions

4.13 Setting Up the User Options

To set up the User Options, proceed as follows:
1. Select Menus > Set Up > User Options to display the available menu options which are listed
and described below.
2. Use the Navigation Keys
to enable the value to be edited.
3. Use the Navigation Keys
OK / Enter Key to confirm the selection.
4. Repeat step 2 and 3 until you have selected and confirmed values for each option.
The User options available for selection are as follows:
Menu Scroll
If this option is enabled then selecting either the Up or Down Navigation Keys will display the
available options in a continuous loop. In effect you only need to keep pressing the one
Navigation Key button to view all available options.
Bar Graph
Options are provided to change the display so that the product signal is shown as a bar graph
rather than a number or a combination of the two displayed at the same time.
Copyright © Loma Systems
to select each option in turn press the OK / Enter Key
to select the required option value and then press the
56
Original Document