Logging In And Out; Logging In - Loma IQ3X Operating Instructions Manual

35
It is recommended that you select the 'Locked' option through the Keylock button
once you have completed your activities to prevent unauthorised access to
features and functionality.

3.11 Logging In and Out

This section provides guidance for logging in and out of the IQ3X Metal Detection System.

3.12 Logging In

The following procedures assume that the machine is switched on and working
normally and that machine access has been 'Locked'.
To log in to the machine proceed as follows:
1. Select the Keylock button
this was set by the last user.
2. Use the Scroll buttons
3. Press the Tick button
4. Use the Scroll buttons
5. Press the Tick button
number for editing.
6. Use the Scroll buttons
7. Press the Tick button
number for editing.
8. Use the Scroll buttons
9. Press the Tick button
number for editing.
10. Use the Scroll buttons
11. Press the Tick button
12. You are now logged in at the selected user level.
Original Document
to display the current user level, which should be LOCKED if
to select the required user level.
twice to select the first password number for editing.
to select the required password number.
twice to confirm the selection and display the second password
to select the required password number.
twice to confirm the selection and display the third password
to select the required password number.
twice to confirm the selection and display the fourth password
to select the required password number.
to confirm the selection.
Operating Instructions
Copyright © Loma Systems