Using The Menus; Editing A Menu Option; Editing A Text Field - Loma IQ3X Operating Instructions Manual

31

3.5 Using the Menus

The options for setting up, learning a product and checking the operation of the metal detector
are accessed through the Menu Soft Keys. See the Menu Map for further information.
The menus available to you depend on the access level that you are currently logged in at.
When the LED is lit on a Soft Menu Key or Menu Navigation Key, this indicates that the key is
active and can be selected to display a new menu, menu option or to change a menu option
value.
Selecting a Menu
Press the active Soft Menu Key directly under the displayed option you wish to select.

3.6 Editing a Menu Option

An asterisk (*) indicates a menu
option that can be edited.
After pressing the OK / Enter Key to
select the menu option for editing,
an arrow points to the value being
edited.
1. Press an active Menu Navigation Key to edit the value.
2. If the value is a number it will increase or decrease.
3. If the value has alternatives such as YES or NO pressing a key will cycle the value between the
alternatives.
4. Once the correct value is being displayed, press the OK / Enter Key to confirm the change.

3.7 Editing a Text Field

1. Press the OK / Enter Key to edit the first character. A blank space is displayed if there is no
existing character.
2. Use the Menu Navigation Keys to step through the available characters until the correct one is
displayed. Characters available are - Dots, Dashes, Underlines, Spaces, Numbers 0 to 9, and
Letters A to Z.
3. Press the OK / Enter Key to confirm selection of the first character and to select the second
character for editing.
4. Use the Menu Navigation Keys to select the second character and press the OK / Enter Key to
confirm its selection and to select the third character for editing.
5. Repeat the above process until all characters have been selected.
Note that you will then need to press the OK / Enter Key for all available characters,
so if you haven't used them all you must keep pressing the OK / Enter Key until the
asterisk (*) appears at the beginning of the option display to indicate that all
characters have been selected.
Original Document
Operating Instructions
Copyright © Loma Systems