3: Getting Started; User Interface; Operator Keys - Loma IQ3X Operating Instructions Manual

29

3: Getting Started

This chapter provides some basic guidelines for initially using IQ3X Metal Detection System.
The following sections provide more information:

User Interface

This section provides brief a description of the machine's user interface so that you may navigate
around the system to make the right selections.
User Access
There are 4 levels of access that can be applied to a user account which are described in this
section.
Logging In and Out
Once a user account has been provided for you this section describes how to log in and out of
your account.
Starting and Stopping
Guidance is provided for each inspection machine type, describing how to start and stop the
machine; including stopping the machine in an emergency.
3.1 User Interface
The IQ3X Metal Detection System provides a two line display user interface shown below, in
conjunction with a number of buttons that enable you to navigate to system options and make
changes as required.

3.2 Operator Keys

Original Document
Cancel Key
When this key is selected the display navigates
back to the previous display menu option.
Menu Soft Key
When the LED is lit, pressing the key will display
other menu options in the two line display.
Menu Navigation Up Key
When the LED is lit this indicates that there are
other menus or menu options available which
you can navigate up to display.
Operating Instructions
Copyright © Loma Systems